Formidable Fixing Floating Shelves To Plasterboard

Use a hammer to gently tap the fixing into the drilled hole.

Fixing floating shelves to plasterboard. 2 Ensure you use the recommended high quality sharp drill bit to suit the wall plug and hole size. If you havent already seen or used Gripit fixings. Clear out the floating shelf and push it upwards to a straight level that it should be.

Fix the Bracket to the Wall. I think I would anchor several dowel screws similar httpwwwgsproductscoukstainless-steel-double-thread-dowel towards the upper edge of the 7cm shelf and then drill corresponding holes in to the stone creating a slightly tapered hole wider at the base. Position the bracket on the wall and fasten it to the stud with long wood screws driven into the pilot holes.

However if the solid bits are just independent spots with no pattern like a piece of wood behind them it is probably dot and dab which is. Secure the Shelf to the Bracket. Inserting the First Fixing.

If the shelf is. Plasterboard Floating Shelf Brackets By changing out the thread section on our concealed plasterboard floating shelf fixings you can fix your shelf solely to a plasterboard surface via the use of a Gripit brown fixing. If there are wooden studs you can drill and screw ordinary wood screws into them through the plasterboard.

Marking and Drilling Holes. They came with fixings like these which are intended for solid walls or studs 2 each for 2 pre-drilled holes in each shelf. 1 Select a longer larger gauge screw and an equivalent wall plug for extra weight capacity when fitting brackets to masonry walls.

These are used in conjunction with the innovative Gripit brown plasterboard fixings. Keep this level maintained. This all means the shelf will come ready.